BVR Kits 45" Electric Tucano
Finishing
Home
Kit Contents
Build Sequence
Colour Schemes
Flying Photos
Customer's Models
Equipment and Set-ups
MODELS FOR SALE
Order Form
 Click on any of the pictures to open an enlarged copy in a new window

1) The wing fairing 29 needs to be shaped to match the fuselage side then chamfered before glueing in place and smoothing in with lightweight filler.

finishing2thumb.jpg

3) The two hatch securing blocks in the accessory pack are best reinforced with some scrap triangle stock for rigidity!

finishing4thumb.jpg

5) The canopy floor is made up from parts 22, 23 & 24 and the clear canopy trimmed to fit perfectly.

finishing1thumb.jpg

 
2) The gap left underneath is filled using a small triangle of scrap balsa.
 

finishing3thumb.jpg

 
4) Parts 12, 25 and 27 are blended in with each other using a razor plane and sanding block to give the characteristic underside shape.
 

finishing5thumb.jpg